POWER PLANT

 Application of Plate Heat Exchanger in Blast Furnace Gas Combined Power Plant

In order to reduce the emissions of coal gas emissions to achieve the purpose of energy saving and environmental protection, you can use blast furnace gas combined cycle power generation equipment for blast furnace gas recycling. The remaining waste heat steam from steam turbine power generation is cooled through the plate heat exchanger and then flow into the waste heat boiler through the feed pump, after generate steam, and then enter the steam turbine to generate electricity, to achieve the purpose of circulating water. Hofmann plate heat exchangers are not only to meet the requirements of the conditions, but also has a compact structure, small size, high heat transfer coefficient, high heat transfer characteristics, which is your best choice in this condition.

Process Flow Diagram of Thermal Power Plant

Firstly, send the steam generated by the boiler to the turbine, and then the turbine rotates the generators to generate electricity. The turbine exhaust enters the cold-end equipment called condenser and condenses into water, which is sent by the condensate pump to the pump, and then into the boiler. Thus it forms a cycle which enables the constant circulating power generation in the power plant.

Applications of plate heat exchanger

Oil cooler of gasoline engine: tubular oil cooler. Working principle: water flows from the water chamber into the steel pipe while the oil flows within the shell and outside the tube bundle. Water and oil exchange heat through the pipe wall.

Type of the used heat exchanger

Plate heat exchanger, tubular heat exchanger, displacement heat exchanger, brazing heat exchanger, full-welded heat exchanger, air heat exchanger